Measuring wear edges for blade drawings

Click on each thumbnail below to view and print full size. One can be filled out and faxed to us so we can custom build you a blade from C1045, high-carbon steel.
SAMPLE DRAWING       BLANK DRAWING     Holland Equipment Co. SLC, UT
If you can't open these documents, click on this image Get Acrobat Reader for a free download.

The example shows us that you need 1ea. center blade, and 2ea. end blades.
Adding all the measurements from bolt center to bolt center AND bolt center to each edge MUST add up to overall blade length or height.
Taking the center blade as an example; note that the measurements - 3 ½” + 5” + 5” + 5” + 5”+ 5” + 5” + 3 ½” - add up to the blade length (37”in this example).
The same holds true for the height of the blade: 3” + 3” = 6”.
We also know from the drawing that the center blade thickness is ¾” and the bolts are 2” long x 5/8” diameter. The bolt quantity (7) is also listed.
The end blades use ¾” x 2 ½” bolts. 4 each are used per end, totaling 8 bolts for the set.
Blades with no bevel are called “blunt”. At the bottom of the page you can choose which sort of bevel (if any) you want. The sample drawing shows the most popular bevel and bolt countersink. Please circle which bevel and countersink you want.

SOME EDGES ARE MEASURED IN MILLIMETERS INSTEAD OF INCHES.
Below is a calculator to convert millimeters to inches.
Or convert inches to millimeters.

Fill in either box and click "Convert"

MM
INCHES



Below is a calculator to tell you how much that steel will weigh.

STEEL WEIGHT CALCULATOR

.......................
.....................






WEIGHT IN POUNDS




Curved grader bladesAlong with bolt-on blades, we can set you up with weld-on blades. Click here for welding instructions.

We also offer heat-treated, curved grader blades
Our curved grader blades are "standard grader punch" (3",3" on 6" centers, 3" 3"). These blades are most often 5/8" or 3/4" thick, are often 6" tall. Common lengths are 6, 7, 8 feet using 5/8" or 3/4" bolts.

We also carry Kenco tungsten carbide blades and can order custom carbide blades to your specifications.

UHMW and Polyurethane snow blow blades Salt Lake Utah

Along with steel and rubber blades, we can help you with UHMW and Polyurethane blades for your plow.







Back

Holland Equipment Co.     2870 West 2100 South - SLC, UT 84119 - (801) 972-1601 - (800) 234-8611 - FAX (801) 972-6730
HOME